MILLER MULTIMATIC 255 PULSED MULTIPROCESS WELDER (208-575V) (907728) ONLINE
The Miller Multimatic 255 PULSED MULTIPROCESS WELDER MIG/Pulsed MIG, Stick and Pulsed DC Tig Welder- 208-575V (907728) is designed for the light manufacturing and fabrication users who want a smaller, versatile workhorse that is easy to setup and easy to use. This 250-amp inverter welder can be integrated into running gear for easy movement around the work area or it can be quickly disconnected from the running gear enabling portability, and making it easier to integrate into a work cell or work in confined spaces.
Easy-to-understand interface
A 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
MILLER DELTAWELD 500 MIGRUNNER W/DUAL INTELLX FEEDER (230/460V) (951819) ONLINE
The Miller Deltaweld 500 MIGRUNNER W/DUAL INTELLX FEEDER power source comes with ArcConnect, Accu-Pulse technology, and digital meters. Accu-pulse process allows for precise control of the pulse arc. This technology also provides optimum molten puddle control and has power to increase wire feed speeds and deposition 20 to 25 percent in many applications. The Deltaweld comes with several of Miller’s standard features such as Wind Tunnel Technology and Fan-On-Demand, yet features their newest generation of technology called ArcConnect. ArcConnect utilizes high-speed signals to improve weld performance and allow point-of-use controls to be located at the feeder.
The Deltaweld 500 comes standard with digital meters and auxiliary power with an optional 14-pin receptacle. These units also feature a dedicated CC gouge moderated up to 3/8″ carbons.
LINCOLN FLEXTEC 500X PULSED MIG MULTI PROCESS WELDER (K3607-1) ONLINE
The Lincoln Flextec 500X PULSED MIG MULTI PROCESS WELDER is easy to set up and simple to operate, yet rugged enough to withstand temperatures up to 131 degrees Fahrenheit. The 500X features Lincoln’s Cross Linc technology that enables the user to change weld parameters at the feeder rather than traveling back to the power source. Cross-linc-capable power sources may be used with standard feeders, however, the full benefits are only achieved when pairing two cross-linc devices together. 500X PULSED MIG MULTI PROCESS WELDER.
The Flextec 500X is equipped with pulsed MIG technology, including weld modes for carbon, stainless, and aluminum metalcore electrodes. In order to gain the full potential of the pulsed capabilities, simply connect an ArcLink technology feeder. This gives you access to multiple synergic pulse modes. Just pick your mode and wire speed, and the machine will do the rest.
The ESAB EM 210 offers 200 amp output, and dual voltage, and weighs just under 29 pounds. The ESAB EM 210 MIG ONLY WELDER is undoubtedly the most quality, cost-efficient 200 amp MIG welder on the market. The user interface is easy to understand, and voltage/amperage control is adjusted with an infinite dial, This welder comes with spool-gun auto detect, saving you setup time when changing processes for aluminum welding. The EM 210 is also field-capable using a 10kW generator.
Riding the wave of their industry-disrupting Rebel line, ESAB’s Rebel EMP 285ic MIG/Stick/TIG Multiprocess Welder combines the go-anywhere, weld-anything ruggedness of the original Rebel 215ic, with the guts and power to tackle even the most demanding industrial applications. This single-phase beast is ESAB’s most capable, powerful, industrial single-phase Rebel to date. Capable of up to 300 Amps of output, this compact machine runs the full range of .035 in and .045 wires and thanks to its size, and rugged handles, you can tackle any job around the shop or out on the job site.
MILLER ARCREACH SMART FEEDER WITH PIPEWORX MIG GUN (951733)
The Miller ArcReach smart FEEDER WITH PIPEWORX MIG GUN (951733) provides remote voltage control at the feeder up to 200 feet away from the power source, all without the need for a control cord – simply connect the 1-ott or 2-ott cable from the power source to the feeder and you’re ready to weld.
The ArcReach smart feeder delivers excellent RMD (regulated metal deposition) and pulsed mg welding up to 200 feet away from the power source. The RMD and pulsed MIG processes also help reduce weld failures and eliminate backing gas on some stainless and chrome-moly applications. All controls are automatically shifted to the ArcReach smart feeder once you connect the lead from the power source. RMD and pulsed MIG welding permits procedures with one wire and one gas to eliminate process switch-over time.
The Hobart IronMan 240 MIG Wire Welder (500574) is a total redesign of the full-size MIG platform, outperforming the competition on arc quality, voltage control, duty cycle and value. It delivers 30-280 amps of pure power in a heavy duty cabinet. The arc of the new IronMan 240 is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. The IronMan 240 easily runs aluminum, just add the optional Hobart SpoolRunner 200 spool gun (770967) and you’re ready to weld aluminum from 18 gauge to 1/2 inch.
LINCOLN LN-25X WIRE FEEDER W/CROSSLINC TECHNOLOGY (K4267)
The Lincoln LN-25X wire feeders feature Crosslinc Technology which enables voltage control at the feeder. This technology eliminates the need for a control cord and saves trips back to the power source, thus resulting in greater safety and productivity. The feeder must be connected to a Crosslinc compatible power source In order to achieve the full benefits; such as the Flextec 350X.
LINCOLN POWER MIG 140 MP MULTI PROCESS WELDER (K4498-1)
The Lincoln PowerMig 140 MP is the best choice for the weekend warrior who wants a 3-in-1 welder. This unit will MIG, Flux-Core MIG, Stick, and DC TIG Weld. DC TIG welding is limited to mild steel and stainless steel. If you need to weld some aluminum, you would need to purchase the SG100 spoolgun (K4360-1). The Power Mig 140 MP weighs 35 lbs and utilitzes 110-120V power so you can take this guy on the road and use wherever needed. The PM 140 MP comes ready to MIG and stick weld out of the box and welds up to 3/16″ material in a single pass.
LINCOLN POWER MIG 140 MP MULTI PROCESS WELDER TIG ONE-PAK (K4499-1)
The Lincoln PowerMig 140 MP is the best choice for the weekend warrior who wants a 3-in-1 welder. This unit will MIG, Flux-Core MIG, Stick, and DC TIG Weld. DC TIG welding is limited to mild steel and stainless steel. If you need to weld some aluminum, you would need to purchase the SG100 spoolgun (K4360-1). The Power Mig 140 MP weighs 35 lbs and utilitzes 110-120V power so you can take this guy on the road and use wherever needed. The PM 140 MP comes ready to MIG and stick weld out of the box and welds up to 3/16″ material in a single pass.