LINCOLN ASPECT 230 AC/DC TIG WELDER WATER COOLED ONE-PAK (K4342-1)

$5,256.00

LINCOLN ASPECT 230 AC/DC TIG WELDER WATER COOLED ONE-PAK (K4342-1)

The Lincoln Aspect 230 offers a lightweight portable tig welder and includes high frequency for high-quality TIG welding on aluminum. The aspect can weld up to 1/4″ and offers a 35% duty cycle at 230 amps. This unit can be easily customised to your application and saved in the available memory settings. This welder offers advanced aluminium controls, AC auto balance technology, pulse, frequency, and additional waveforms. The Water-Cooled One-Pack includes all of your necessary items for full water-cooled TIG welding.

The Aspect 230 offers four different AC wave forms. Soft Square allows for increased puddle control, Sine offers a soft sounding arc, Square offers faster travel speeds, and Triangular offers reduced heat input on thinner materials.

 

Add to wishlist
SKU: LINCOLN ASPECT 230 AC/DC TIG WELDER WATER COOLED ONE-PAK (K4342-1) Category:

Description

LINCOLN ASPECT 230 AC/DC TIG WELDER WATER COOLED ONE-PAK (K4342-1)

The Lincoln Aspect 230 offers a lightweight portable tig welder and includes high frequency for high-quality TIG welding on aluminum. The aspect can weld up to 1/4″ and offers a 35% duty cycle at 230 amps. This unit can be easily customised to your application and saved in the available memory settings. This welder offers advanced aluminium controls, AC auto balance technology, pulse, frequency, and additional waveforms. The Water-Cooled One-Pack includes all of your necessary items for full water-cooled TIG welding.

The Aspect 230 offers four different AC wave forms. Soft Square allows for increased puddle control, Sine offers a soft sounding arc, Square offers faster travel speeds, and Triangular offers reduced heat input on thinner materials.

Key Features
Intellistart Technology – Automatically provides softer starts and minimal distortion on thinner materials and hotter starts required for thicker materials.
PowerConnect Technology – Automatically adjusts to input power from 120-460V, 50 or 60 Hz, single or three phase.
AC Auto Balance Technology – Automatically provides optimal mix of cleaning and penetration when welding aluminium.
Memory Capability – The memory function allows saving up to 9 specific welding procedures.
Fan-As-Needed – The cooling fan operates only when needed to assure proper cooling of the machine.
Green Mode – Ability to put machine in standby mode after 10 minutes of inactivity to reduce power consumption.
Cooler Power Supply – Built-in 115V power supply comes standard.

Advanced Features
• AC Frequency: 40-400 Hz
• AC Balance: 35-99% (EN%)
• AC Pulse: 0.1-25%
• DC Pulse: 0.1-2,000 PPS

Quick Specs
• Input Power: 120-460V | 1-Phase | 50/60 Hz
• Duty Cycle: 120V – 60% @ 125A | 230V – 60% @ 190A
• Amperage Draw: 120V – 21A | 208V – 11A | 250V – 10A | 460V – 5A
• Output Range: 120V – 2-150A | 208-460V – 2-230A
• Dimensions: 16.5″ H x 9.7″ W x 19.9″ D
• Weight: 50.5 lbs

Includes
• Aspect 230 AC/DC Power Source
• Cool Arc 22 Water Cooler (K3475-1)
• Cart (K4441-1)
• Foot Pedal (K870)
• 25 Ft Water-Cooled 20 Series TIG Torch with Consumables
• • Regulator with Flow Gauge and Hose Kit
• Ground Clamp Set with 15 Ft Cable
• Torch Twist Mate Connector

Brand Lincoln
SKU ILIN20200004
MPN LINK4342-1
Mfgs MPN K4342-1
Prop65 Yes
Process Stick, TIG
Max Amperage Output 230 Amps
Phase Single Phase
Manufacturer’s Warranty 3 Years
Polarity AC/DC
Duty Cycle 60%
Duty Cycle 60% @ 190A | 35% @ 230A
Portability 50 lbs
Skill Level Weekend Warrior, Career Welder
Discontinued Product No

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Related products

  • Quick View

    ESAB REBEL EMP 235IC MIG/STICK/TIG WELDER (0558012702)

    Add to wishlist
    $2,310.00

    ESAB REBEL EMP 235IC MIG/STICK/TIG WELDER (0558012702)

    The ESAB Rebel EMP 235ic MIG/Stick/TIG Welder has a similar look to the Rebel 215 units, but packs more power for those demanding applications. The Rebel units feature sMIG technology, an exclusive, dynamic arc control that constantly monitors complex arc characteristics adapting to your technique to provide a smooth and superior weld. The Rebel features 2 modes: basic and advanced. Basic mode allows you to set wire diameter and material thickness & you’re ready to pull the trigger. The advanced mode gives you full control over all arc characteristics. The research and technology put into this machine is truly astounding (you can even access your correct consumable part numbers and user manual on the 4.3″ LCD screen). Like ALL other multi-process units on the market, this is a DC only machine and will not TIG weld aluminium.

    Features
    • sMIG technology
    • 4.3-in Color LCD Display
    • 110V/230V Dual Input Voltage
    • Weld parameter storage
    • Hot start (Stick mode only)
    • Arc Force (Stick mode only)
    • Lift arc (TIG mode only)
    • Trigger lock (2T, 4T)
    • Voltage trim adjustment (MIG mode only)
    • Inductance adjustment (MIG mode only)
    • Burn back adjustment (MIG mode only)
    • Pre-flow/post-flow adjustment (MIG mode only)
    • Short Arc and Spray Transfer capable
    • 4, 8, and 12 inch spool capable

    Quick Specs
    • Input Power: 110V/230V
    • Current Range: 5-150A (120V), 5-250A (230V)
    • Wire Diameter Capacity: .023″-.045″
    • Weight: 53lbs
    • Max Plate Thickness: 1/2″
    • Dims: 26.5″ H x 19.5″ L x 11.5″ W
    • Warranty: 3 years on power source, 1 year on torch

    Comes Complete With
    • Rebel EMP 235ic Power Source
    • 15-foot Tweco Spraymaster 250 MIG gun
    • 10-foot Tweco 200A electrode holder
    • 10-foot Tweco ground clamp with leads
    • Victor argon flow gauge regulator with 12.5-foot gas hose (0781-2743)
    • Ten general purpose 7018 stick electrodes
    • ESAB 70S-6 .035 10-lb spool of wire
    • Spare nozzle (22 series), diffuser , and 2 contact tips
    • Drive Rolls: .023/.030 smooth (7977036) | .030/.035 V-knurled (7977732) |.045 V-knurled
    • Material thickness guide
    • Spare .035 conduit liner
    • 120V and 230V plugs

    Add to cart
  • Quick View

    215 AUTO-SET MULTIPROCESS WELDER

    Add to wishlist
    $1,242.00

    215 AUTO-SET MULTIPROCESS WELDER

    BUY MILLER MULTIMATIC 215 AUTO-SET MULTIPROCESS WELDER (907693) ONLINE

    When Miller Electric releases a new machine, they don’t just add another toy to the sandbox of options. When Miller Electric comes to market with a new machine, they create a whole new playground! The Miller Multimatic 215 Auto-Set Multiprocess Welder (907693) is the latest offering in Miller’s line of go-anywhere, do-anything machines. 215 AUTO-SET MULTIPROCESS WELDER.

    If you’re a fan of Miller machines, you’ll have noticed that they’ve gotten smaller and more powerful in recent years. The Multimatic 215 is based on the same smaller, lightweight inverter-based footprint of the recent Millermatic machines and will once again return Miller Electric to the dominant position among the multi-process options in the marketplace.

     

    Add to cart
  • Quick View

    ESAB REBEL EMP 205IC AC/DC MULTI-PROCESS WELDER (0558102553)

    Add to wishlist
    $2,430.00

    ESAB REBEL EMP 205IC AC/DC MULTI-PROCESS WELDER (0558102553)

    The ESAB Rebel EMP 205ic features sMIG technoloty. sMIG is an exclusive, dynamic arc control that constantly monitors complex arc characteristics adapting to your technique to provide a smooth and superior weld. The Rebel features 2 modes: basic and advanced. Basic mode allows you to set wire diameter and material thickness & you’re ready to pull the trigger. The advanced mode gives you full control over all arc characteristics. The research and technology put into this machine is truly astounding (you can even access your correct consumable part numbers and user manual on the 4.3″ LCD screen). You no longer have to be a career welder or a rocket scientist to set your machine up correctly.

     

    Add to cart
  • Quick View

    CK WORLDWIDE MT200-AC/DC TIG WELDER

    Add to wishlist
    $1,170.00

    CK WORLDWIDE MT200-AC/DC TIG WELDER

    The MT200-AC/DC is the answer to both creativity and production driven TIG welding. This innovative TIG welding machine provides the ability to quickly and efficiently adapt to dynamic welding situations, while maintaining the same quality of experience you have come to expect from CK Worldwide. Its compact portable design allows you to easily tackle any project from fabrication and education to aerospace and nuclear applications. Whether you TIG weld for enjoyment or as a career you will find that the MT200 can help you accomplish your toughest welding challenges. With background testing performed by production welders and the best TIG welding professionals in the industry the MT200 delivers precision welding in a conveniently packaged system.

     

    Add to cart

LINCOLN ASPECT 230 AC/DC TIG WELDER WATER COOLED ONE-PAK (K4342-1)

$5,256.00